DN16 Solar Pipe
The best way to connect any Solar Thermal system is using corrugated pipe DN16 Solar Pipe.
It is twin line so you fit the flow and return at the same time
It is stainless steel so no corrosion
It is corrugated so it is possible to make tight bends using only your hands. It will not crack or deform.
I comes with a twin layer of foam insulation protecting it from temperatures up to 170 degrees
It has a UV protective cover so that it is unaffected by the sun and is also protected from rain It can be cut with a simple clamp cutter.
There is a fitted sensor cable running the length of the pipe
The fittings are easily attached using either the compression tool or for DIY’ers it is easy to finish the ends using a copper fitting and a steel washer!.
The joints are then fastened with a spanner…no soldering here!
It is simple to do a complete solar installation with a cheap pipe cutter, a steel washer and a couple of adjustable spanners.
The pipe comes in twin line 10 mtr coils which is enough for a standard installation.
Instructions in how to make the joints come with each roll